UPS AMERICAN POWER PRO BR500I 220V C/ESTABILIZADOR

Product Overview Description APC Back-UPS RS, 500VA/300W, Input  230V/ Output  230V, Interface Port Features AC Outlet, Addl Surge Protected Outlets, Audible Alarms, Automatic Self Test, Automatic Shutdown, Automatic Voltage Regulation (AVR), Cold-start, Input Line Cord, Intelligent Battery Management, Resettable circuit breaker, Software, Status Indicator LED's, Surge Protection Includes CD with software, USB cable, User Manual Communications & Management Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators Audible alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Output Output power capacity 500 VA Output power capacity 300 Watts Max Configurable Power 500 VA Max Configurable Power 300 Watts Nominal output voltage 230 V Output Connections (3)IEC 320 C13 (1)IEC 320 C13 (Surge) Input Nominal input voltage 230 V Input frequency 50/60 Hz +/- 3 Hz (auto sensing) Input Connection Type IEC-320 C14 Cord Length 6 feet (1.83 meters ) Input voltage range for main operations 168 - 280 V Surge Protection and Filtering Surge energy rating 300 joules Dataline protection RJ-45 Modem/Fax protection (two wire single line) Runtime Typical backup time at half load 12.4 minutes (150 Watts) Typical backup time at full load 5.8 minutes (300 Watts) Runtime Chart Back-UPS RS Batteries Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof RBC Quantity 1 Physical Maximum height dimensions 6.50 inches ( 16.51 cm) Maximum width dimensions 3.60 inches ( 9.14 cm) Maximum depth dimensions 11.20 inches ( 28.45 cm) Net weight 12.95 lbs ( 5.89 kg) Shipping Weight 15.42 lbs ( 7.01 kg) Shipping Height 9.10  inches ( 23.11 cm) Shipping Width 6.60  inches ( 16.76 cm) Shipping Depth 14.20  inches ( 36.07 cm) Color Beige Units per Pallet 90.0 UPC Code 731304191773 Environmental Operating Environment 0 - 40 °C (32 - 104°F)

IMPORTANTE:

Los UPS de APC  traen un CD y un cable de conexión. Es necesario instalar el software. Dentro de este software hay una parte referida a la sensibilidad. Por favor, ajustarla donde marca la media y así desaparecerán las inestabilidades debidas a la red eléctrica y a la alta sensibilidad con que vienen programados los UPS.